Key takeaways
- Compare the best thermal paste options for CPUs and GPUs, with published conductivity figures, syringe sizes, and picks for every budget tier.
The best thermal paste for most builders is the ARCTIC MX-4, because it pairs a published thermal conductivity of 8.5 W/mK with a forgiving, electrically non-conductive formula and a generous 4 gram syringe. Builders chasing the lowest possible temperatures should look at Thermal Grizzly Kryonaut, which carries a higher 12.5 W/mK rating, while anyone who wants a simple, tidy application will appreciate the Corsair TM30 and its included applicator. This guide compares five well-documented compounds, using only figures the manufacturers publish, so you can match a paste to your processor, your cooler, and your comfort level with spreading thicker formulas.
Every compound below is a non-conductive, non-capacitive formula, which means a small spill onto surrounding components carries far less risk than a liquid metal product. The real differences sit in three places: the published thermal conductivity, the viscosity that decides how a paste spreads under mounting pressure, and the syringe size that decides how many builds a single purchase covers. Read the quick picks, check the specs blocks, and use the buying notes at the end to settle on the right tube.
As an Amazon Associate, we earn from qualifying purchases.
Table of Contents
- What to Look for in a Thermal Paste
- ARCTIC MX-4 (4 g)
- Thermal Grizzly Kryonaut (1 g)
- Noctua NT-H1 (3.5 g)
- ARCTIC MX-6 (4 g)
- Corsair TM30 (3 g)
- How These Pastes Compare
- Frequently Asked Questions
- Conclusion
- Product and ASIN Reference
What to Look for in a Thermal Paste
Thermal conductivity, measured in watts per meter-kelvin and written as W/mK, describes how readily a compound moves heat from the processor heat spreader into the cooler base. Higher figures generally help, although mounting pressure, spread quality, and cooler design all influence the final temperature as well. Some makers publish a conductivity figure and others, including Noctua and ARCTIC for its MX-6, publish density, viscosity, and electrical data instead. Neither approach is wrong, but it does mean headline numbers alone cannot rank every paste.
Viscosity decides how a paste behaves during installation. Thin compounds spread easily and suit builders who use the pea or cross method, letting the cooler do the work. Thick compounds hold their shape, resist pump-out under repeated heating and cooling cycles, and suit large heat spreaders or graphics cards where the die sits exposed. Density and syringe size matter for value: a 4 gram tube typically covers many processor installations, while a 1 gram syringe of a premium compound may cover only a handful.
Electrical behaviour is the third factor. Every paste in this guide is electrically non-conductive, so it is safe around surface-mounted components near the socket. Liquid metal compounds conduct electricity and sit outside this guide entirely. Finally, consider longevity claims. Noctua publishes a recommended usage time of up to five years on the processor for NT-H1, and ARCTIC positions both of its pastes here as long-durability formulas that reach full performance without a curing period.
ARCTIC MX-4 (4 g)
The ARCTIC MX-4 is the default recommendation for most builds, and it earns that place with a balanced spec sheet rather than a single headline figure. ARCTIC rates the compound at 8.5 W/mK, builds it from carbon micro-particles, and sells it in a 4 gram syringe with a spatula included in this listing. That combination suits first-time builders and experienced hands alike, because the paste spreads predictably and the quantity covers repeated cooler swaps, graphics card work, and console servicing without rationing each application.
Because the formula contains no metallic particles, ARCTIC describes it as electrically non-conductive and non-capacitive, which removes the short-circuit worry that comes with metal-based compounds. The published viscosity of 870 poise places it in the middle of the range: fluid enough to spread under cooler pressure, yet stable enough to stay where you put it. ARCTIC also states that the compound reaches its full performance immediately, with no burn-in period, and that it is formulated for long durability once applied.
Specs
- Brand: ARCTIC
- Model: MX-4, part number ACTCP00031B
- Net weight: 4 g, spatula included
- Thermal conductivity: 8.5 W/mK
- Density: 2.50 g/cm³
- Viscosity: 870 poise
- Volume resistivity: 3.8 x 10^12 Ω-cm
- Breakdown voltage: 7.5 kV/mm
- Composition: carbon micro-particles, metal-free
- Electrical behaviour: non-conductive and non-capacitive
- Tier: budget
Choose the MX-4 if you want one tube that handles nearly everything at a budget tier. It is equally at home under a tower air cooler, inside a laptop during a repaste, or on a graphics card, and the spec sheet is complete enough to compare directly against pricier rivals.
Thermal Grizzly Kryonaut (1 g)
Thermal Grizzly Kryonaut is the premium pick for builders who prioritise heat transfer above convenience. Its published thermal conductivity of 12.5 W/mK is the highest in this guide, and its thermal resistance figure of 0.0032 K/W underlines why overclockers and small-form-factor builders reach for it when every degree matters. The operating range, published as minus 250 degrees Celsius to plus 350 degrees Celsius, reflects a formula designed for demanding cooling, including sub-ambient work.
The trade-offs are quantity and handling. This listing is a 1 gram syringe, so it covers a limited number of applications, and the published viscosity range of 130 to 170 pascal-seconds describes a thick paste that rewards a careful manual spread with the included spatula. Thermal Grizzly states the compound does not cure and does not dry out at temperatures up to 80 degrees Celsius, and it remains electrically non-conductive despite its performance focus.
Specs
- Brand: Thermal Grizzly
- Model: Kryonaut, part number TG-K-001-RS
- Net weight: 1 g, spatula included
- Thermal conductivity: 12.5 W/mK
- Thermal resistance: 0.0032 K/W
- Density: 3.7 g/cm³
- Viscosity: 130 to 170 Pa·s
- Operating temperature range: minus 250 °C to plus 350 °C
- Electrical behaviour: non-conductive
- Tier: premium
Choose Kryonaut if you are cooling a high-heat processor, a flagship graphics card, or a compact build with limited airflow, and you are comfortable spreading a thicker compound. For a single flagship build, the small syringe is less of a drawback than it first appears.
Noctua NT-H1 (3.5 g)
Noctua NT-H1 is the mid-range pick for builders who value a documented service life. Noctua publishes a recommended storage time of up to three years and a recommended usage time on the processor of up to five years, figures few rivals state so plainly. The 3.5 gram syringe holds 1.4 millilitres of compound, which Noctua positions as enough for multiple processor installations depending on die size.
Noctua does not publish a thermal conductivity figure for NT-H1, describing it instead as a hybrid compound of micro-particles. What it does publish is reassuring: a density of 2.49 g/cm³, an operating range from minus 50 to plus 150 degrees Celsius, and confirmation that the compound is not electrically conductive and will not corrode. The texture is widely regarded as easy to work with, and cleanup is simple because the formula wipes away without solvents for routine removal.
Specs
- Brand: Noctua
- Model: NT-H1
- Net weight: 3.5 g
- Volume: 1.4 ml
- Density: 2.49 g/cm³
- Operating temperature range: minus 50 °C to plus 150 °C
- Recommended storage time: up to 3 years
- Recommended usage time on the processor: up to 5 years
- Electrical behaviour: not electrically conductive, non-corroding
- Tier: mid-range
Choose NT-H1 if you maintain several machines, repaste on a schedule, or simply want the manufacturer to state plainly how long the compound should stay in service. Its documentation-first approach makes it the easiest paste here to plan around.
ARCTIC MX-6 (4 g)
The ARCTIC MX-6 is the newer premium-tier sibling of the MX-4, built on a carbon filler formula that ARCTIC says delivers up to 20 percent better performance than the MX-4. ARCTIC does not publish a W/mK figure for this compound. Instead, the spec sheet leads with a viscosity of 45,000 poise, far thicker than the MX-4, which helps the paste stay in place on vertical mounts and exposed dies, and supports its positioning for graphics cards and consoles as well as processors.
The published electrical data mirrors the MX-4 in the areas that matter for safety: the compound is non-conductive and non-capacitive, with a breakdown voltage of 7.5 kV/mm. ARCTIC states a continuous use temperature range from minus 50 to plus 150 degrees Celsius, and notes that the paste reaches maximum performance immediately after application, with no burn-in time. This 4 gram listing keeps the generous sizing of its sibling, so a single syringe covers many installations.
Specs
- Brand: ARCTIC
- Model: MX-6, part number ACTCP00080A
- Net weight: 4 g
- Thermal conductivity: not published by the manufacturer
- Density: 2.6 g/cm³
- Viscosity: 45,000 poise
- Volume resistivity: 1.8 x 10^12 Ω-cm
- Breakdown voltage: 7.5 kV/mm
- Continuous use temperature: minus 50 °C to plus 150 °C
- Electrical behaviour: non-conductive and non-capacitive
- Tier: premium
Choose the MX-6 if you liked the MX-4 formula but want the thicker consistency for a graphics card repaste or a build you do not plan to open again for years. The higher viscosity takes a little more patience during spreading, and that patience pays off in stability.
Corsair TM30 (3 g)
The Corsair TM30 is the tidy, applicator-led option in this guide. Corsair builds the compound on a premium zinc oxide base, publishes a thermal conductivity of 3.8 W/mK, and quotes an ultra-low thermal impedance of 0.01 °C-in²/W. Those figures sit below the leaders here, yet the TM30 earns its place through application control: this listing includes an applicator, and the low-viscosity formula fills microscopic surface imperfections without demanding much mounting pressure.
Corsair states that the compound is non-conductive, non-toxic, and free of volatile compounds, and that once installed it keeps its consistency for years without drying or cracking. The 3 gram syringe suits a handful of builds, and the stencil-style application approach helps new builders lay down an even layer on the first attempt. For office machines, family computers, and mainstream gaming rigs that run at factory settings, that ease counts for a great deal.
Specs
- Brand: Corsair
- Model: TM30, part number CT-9010001-WW
- Net weight: 3 g, applicator included
- Thermal conductivity: 3.8 W/mK
- Thermal impedance: 0.01 °C-in²/W
- Composition: premium zinc oxide thermal material
- Viscosity: low-viscosity formula
- Electrical behaviour: non-conductive and non-toxic
- Tier: mid-range
Choose the TM30 if you are new to applying paste, maintaining a machine for someone else, or working in a tight case where a controlled application matters more than the last degree of cooling. It is the most forgiving compound in this guide.
How These Pastes Compare
Spread across tiers, the five compounds divide cleanly. The MX-4 sits at the budget tier and still publishes a full electrical and thermal data set, which makes it the value anchor of the guide. The TM30 and NT-H1 occupy the mid-range: Corsair leans on application aids and a stated impedance figure, while Noctua leans on documented service life. The Kryonaut and MX-6 sit at the premium tier, one chasing the highest published conductivity, the other chasing consistency and staying power with a much thicker formula.
If your cooler uses a large cold plate and your processor runs hot under sustained loads, conductivity and bond-line behaviour matter most, and Kryonaut is the natural pick. If you repaste graphics cards or consoles, the thicker MX-6 resists pump-out well. If you simply need a dependable tube for years of ordinary builds, the MX-4 or NT-H1 will serve you without drama, and the TM30 remains the friendliest option for a careful, guided application.
Frequently Asked Questions
How much thermal paste should I apply to a processor?
A pea-sized amount in the centre of the heat spreader is enough for most desktop processors, because mounting pressure spreads the compound into a thin layer. Larger heat spreaders suit a thin cross or a manual spread with a spatula. Using too much paste adds mess without improving cooling, while too little leaves dry patches at the corners.
How often should thermal paste be replaced?
Replace paste whenever you remove the cooler, because the old layer will not reseal evenly. Beyond that, follow the maker guidance: Noctua publishes a recommended usage time of up to five years for NT-H1, and most quality compounds in this guide are formulated to remain stable for years under normal operating temperatures.
Can I use the same thermal paste on a graphics card?
Yes, provided the compound is electrically non-conductive, as all five pastes here are. Graphics card dies sit exposed without a heat spreader, so a thicker compound such as the MX-6 or Kryonaut suits them well, and you should cover the entire die surface because there is no spreader to distribute the paste.
Is a higher W/mK rating always better?
Not on its own. Conductivity figures come from each maker under its own conditions, and some makers, including Noctua and ARCTIC for the MX-6, do not publish one at all. Application quality, mounting pressure, viscosity, and cooler design all shape real temperatures, so treat the rating as one input alongside the full specs block rather than a league table.
Conclusion
For most people, the ARCTIC MX-4 remains the easiest recommendation in this guide: a complete published spec sheet, a safe metal-free formula, and a 4 gram syringe at a budget tier. Step up to Thermal Grizzly Kryonaut when cooling headroom is the priority, or to the ARCTIC MX-6 when you want a thicker premium compound from the same family. Pick the Noctua NT-H1 for its clearly documented service life, and the Corsair TM30 when an included applicator and a forgiving low-viscosity formula matter most. Whichever tube you choose, apply a thin, even layer, mount the cooler evenly, and your processor will move heat the way its designer intended.
Read next
- Best Laptop Power Banks: 5 Fast USB-C Picks for 2026
- Best USB Fans: 5 Picks for Desks, Travel and Cooling
- Best PCIe Riser Cables: 5 Picks for Vertical GPU Mounts
- Best Laptop Cooling Pads: 5 Picks for Cooler, Quieter Use
- Best Ethernet Switches: Top Gigabit Picks for Home Networks
- Best Monitor Wall Mounts for Desks, Studios and More