Key takeaways
- The Akro-Mils 30282 AkroBin is a super-size stackable tote rated for 200 lb per bin. Check dimensions, stacking limits, dividers and best uses here.
The Akro-Mils 30282 AkroBin is the tall member of the Super-Size AkroBin line, built for the bulky, awkward items that overflow ordinary parts bins. It measures 20 inches long, 12-3/8 inches wide and 12 inches high on the outside, and Akro-Mils rates it to hold up to 200 pounds per bin. The open hopper front keeps contents reachable even when bins are stacked, which is the whole point of the AkroBin format.
This guide walks through the published dimensions, load ratings and accessory options for the 30282, who it suits, and where its open-front, lid-free design is the wrong tool. Everything below comes from the manufacturer specifications for this model, so you can match the bin to your shelving and your load before ordering.
As an Amazon Associate, we earn from qualifying purchases.
Quick answer
The Akro-Mils 30282 AkroBin is a super-size, open-front storage bin measuring 20 by 12-3/8 by 12 inches, rated to hold up to 200 pounds per bin. Molded from industrial-grade polymer, it stacks securely, resists water, rust and corrosion, and suits bulky parts in workshops, warehouses and garages that smaller parts bins cannot swallow.
Key specs
| Spec | Detail |
|---|---|
| Brand | Akro-Mils |
| Model number | 30282 |
| Product line | Super-Size AkroBin |
| Outside dimensions | 20 in L x 12-3/8 in W x 12 in H |
| Inside dimensions | 16-7/8 in L x 10-11/16 in W x 11-3/8 in H |
| Inside bottom length | 15-1/2 in |
| Maximum load per bin | 200 lb |
| Stacking capacity | 60 lb per bin when stacked |
| Material | Industrial-grade polymer, one-piece molded construction |
| Material resistance | Water, rust and corrosion proof; resists weak acids and alkalis |
| Colors in the model line | Red, blue, yellow, clear |
| Color of this listing | not stated |
| Pack quantity of this listing | not stated |
| Length divider accessory | Akro-Mils 40282 length divider (sold separately) |
| Label accessory | Clear window 21282 and card stock holders 29304 (sold separately) |
| Item weight | not stated |
| Warranty | 1-year limited warranty; guaranteed not to crack or break under normal load conditions |
A note on the ratings: the 200 lb figure is the maximum load for a single bin, while the stacking capacity is lower, at 60 lb per bin when bins are stacked on each other. Plan shelf and stack loads around the stacking figure, not the headline number. Akro-Mils also notes that Super-Size AkroBins are not recommended for hanging on rack or panel systems; they are made to sit on shelving or stack.
Who it’s for / who should skip it
Who it’s for
- Maintenance and repair shops storing bulky spares, fittings and components that need to stay visible and reachable.
- Warehouse and stockroom teams running pick faces for larger items, where the open front speeds up grabbing and restocking.
- Garage and workshop owners consolidating power tool accessories, clamps, cords and hardware into fewer, bigger bins.
- Anyone already using Super-Size AkroBins who wants the taller 12-inch profile on the same 20 by 12-3/8 inch footprint as the shorter bins in the line.
Who should skip it
- Anyone who needs a lid, dust seal or weather seal. The AkroBin is open at the front by design, so contents stay exposed to dust and splashes.
- Anyone storing small fasteners in bulk. A 20-inch open bin swallows screws and bolts into one deep pile; smaller divided bins organize them better.
- Anyone planning to hang bins on a louvered panel. Akro-Mils does not recommend the Super-Size line for rack or panel hanging.
- Anyone short on shelf depth. At 20 inches long, this bin overhangs standard shallow shelving.
How it compares with typical alternatives
Against a typical lidded storage tote, the 30282 trades protection for access. A lidded tote seals out dust and stacks for transport, but every reach means removing the lid and digging. The AkroBin hopper front lets you pull parts from any bin in a stack without unstacking, which is why the format dominates workbenches and pick faces. Its 200 lb per-bin rating also sits well above what household totes are built to carry.
Against smaller parts bins in the same general category, the difference is scale. Small bins divide tiny components into labeled cells; the 30282 is a volume bin for items measured in handfuls, not pinches. Against wire or mesh baskets, the solid polymer walls keep small items from slipping through and shrug off water, rust and corrosion, but you lose airflow and some visibility from the sides. The optional length divider and clear label window are the middle path: they split and label the big cavity without giving up the open front.
FAQ
How much weight can the 30282 AkroBin hold?
Akro-Mils rates the 30282 at up to 200 lb per bin on its own. When bins are stacked, the published stacking capacity is 60 lb per bin, so loads in a stack should stay within that lower figure.
Can the 30282 be divided into compartments?
Yes. Akro-Mils offers the 40282 length divider for this model, sold separately in packs of three, which splits the bin lengthwise. A clear window, model 21282, and card stock label holders, model 29304, are also listed as accessories for labeling and content protection.
Does the 30282 AkroBin have a lid?
No lid is published for this model. The Super-Size AkroBin design uses an open hopper front so contents stay accessible while stacked, which means it does not seal against dust or moisture the way a lidded tote does.
Can I hang the 30282 on a louvered panel or rack?
Akro-Mils states that Super-Size AkroBins are not recommended to hang on rack or panel systems. The 30282 is designed to sit on shelving or to stack on top of other Super-Size bins instead.
Final verdict
The Akro-Mils 30282 AkroBin is a purpose-built volume bin: a 20 by 12-3/8 by 12 inch polymer tote with a 200 lb single-bin rating, a 60 lb per-bin stacking rating, and an open front that keeps bulky contents reachable in a stack. It earns its shelf space in workshops, stockrooms and garages where access speed matters more than sealing. If you need dust protection, a lid, or panel hanging, look at a different format. If you need one deep, strong, stackable bin that bulky parts actually fit into, the 30282 is the tall pick of its line.
Read next