Updated Nov 19, 2026· 9 min read

Key takeaways

  • Compare the best monitor wall mounts for single, dual and ultrawide screens, with VESA fit, weight limits, tilt, swivel and extension specs for each pick.

The best monitor wall mounts free your entire desk surface while keeping the screen at a comfortable height and angle. For a single everyday monitor, the WALI GSWM001 gas spring wall mount is the most versatile pick here: it fits screens from 13 to 32 inches, holds up to 22 pounds, and extends up to 19.3 inches from the wall. Ultrawide owners should look at the VIVO MOUNT-VW01M, which carries screens up to 49 inches and 44 pounds, while dual-screen desks are served by the WALI GSWM002 with two independent gas spring arms. The MOUNT PRO PR7001 covers lighter monitors on a budget tier, and the Mounting Dream MD2413-MX brings a TV-style full motion arm with a 77 pound rating for large screens. Every pick below is matched to published VESA patterns, weight limits, and motion ranges so you can confirm fit before ordering.

As an Amazon Associate, we earn from qualifying purchases.

Table of Contents

  • How to Choose a Monitor Wall Mount
  • MOUNT PRO Single Monitor Wall Mount (PR7001)
  • WALI Single Monitor Gas Spring Wall Mount (GSWM001)
  • Mounting Dream Full Motion Wall Mount (MD2413-MX)
  • WALI Dual Monitor Gas Spring Wall Mount (GSWM002)
  • VIVO Full Motion Ultrawide Monitor Wall Mount (MOUNT-VW01M)
  • Which Wall Mount Fits Your Setup
  • Frequently Asked Questions
  • Conclusion
  • Product and ASIN Reference

How to Choose a Monitor Wall Mount

Check the VESA pattern first. Nearly every monitor in this roundup mounts through the four threaded holes on its back panel, spaced 75 by 75 millimeters or 100 by 100 millimeters apart. Measure the spacing on your screen or find it in the monitor manual. A mount whose plate covers your pattern bolts on directly; a screen with no VESA holes needs a separate adapter bracket, and recessed or curved back panels sometimes need the longer screws and spacers included in most hardware kits.

Match the weight rating to the bare screen. A mount only carries the monitor itself once the factory stand comes off, so weigh the screen without its base or check the maker figure for panel-only weight. Leave headroom between that figure and the mount limit. Gas spring arms also have a minimum weight: a very light screen on a strong spring can drift upward, so confirm your monitor sits inside the published range at both ends.

Plan for the wall, not just the mount. Wall mounts anchor into wood studs, concrete, or brick, and the makers of the arms below state plainly that drywall alone is not a safe anchor. Locate a stud with a finder, confirm the wall plate spans it, and think about where cables will run once the desk stand is gone. A mount that extends 16 to 19 inches also swings the screen through a wide arc, so check clearance for shelves, cabinets, and second screens before fixing the plate height.

Pick the motion you will actually use. Fixed and tilting brackets hold a screen flat for shared viewing walls. Articulating arms add swivel and extension for corner desks and sit-stand work. Gas spring arms add tool-free height adjustment, which suits anyone who changes position through the day. Rotation to portrait helps coders and document work, and a small post-install leveling range forgives a slightly imperfect plate.

MOUNT PRO Single Monitor Wall Mount (PR7001)

Check price on Amazon

The MOUNT PRO PR7001 is the budget tier entry in this roundup, a gas spring wall arm for one screen between 13 and 32 inches. It holds up to 17.6 pounds, which covers the large majority of office monitors once their stands are removed, and the spring counterbalance lets you raise, lower, tilt, and swivel the screen without tools. The plate fits both common VESA patterns, 75 by 75 and 100 by 100 millimeters, and the metal build keeps the packed size compact at 38.5 by 23.2 by 7 centimeters. For a single lighter monitor over a small desk, this is the simplest route onto the wall.

Specs

  • Screen size: 13 to 32 inches
  • Weight capacity: up to 17.6 lb
  • VESA patterns: 75x75mm and 100x100mm
  • Motion: gas spring arm, full motion tilt, swivel, and height adjustment
  • Material: metal
  • Model: PR7001
  • Product dimensions: 38.5 x 23.2 x 7 cm; 1.89 kg

WALI Single Monitor Gas Spring Wall Mount (GSWM001)

Check price on Amazon

The WALI GSWM001 is the mid-range single-screen pick and the most flexible arm in this group for everyday desks. Its gas spring supports monitors from 13 to 32 inches weighing up to 22 pounds, with a height adjustment range of 12.2 inches and a maximum extension of 19.3 inches from the wall, so the screen can pull close for focused work or fold back to clear the desk. The detachable plate fits 75 by 75 and 100 by 100 millimeter VESA patterns. WALI specifies installation into a wood stud, concrete wall, or brick wall, and warns against mounting on drywall alone. Adjustable spring tension keeps the screen where you leave it across the full weight range.

Specs

  • Screen size: 13 to 32 inches
  • Weight capacity: up to 22 lb (10 kg)
  • VESA patterns: 75x75mm and 100x100mm
  • Maximum extension: 19.3 inches
  • Height adjustment range: 12.2 inches
  • Wall types: wood stud, concrete, or brick (not drywall alone)
  • Model: GSWM001

Mounting Dream Full Motion Wall Mount (MD2413-MX)

Check price on Amazon

The Mounting Dream MD2413-MX is a TV-style full motion arm that also suits large monitors, and it carries the highest weight rating in this roundup at 77 pounds. It fits screens from 26 to 55 inches with VESA patterns from 75 by 75 up to 400 by 400 millimeters, which covers big desktop displays and small televisions on the same bracket. The arm extends up to 16.7 inches and retracts to 2.7 inches from the wall, tilts from 5 degrees up to 15 degrees down, and swivels up to 180 degrees depending on screen width. The single-stud plate design centers the screen on one stud, and the kit includes a magnetic bubble level and cable ties. Choose this mount for a heavy large-format screen or a shared display wall where the monitor doubles for presentations.

Specs

  • Screen size: 26 to 55 inches
  • Weight capacity: up to 77 lb (35 kg)
  • VESA patterns: 75x75mm to 400x400mm
  • Extension: up to 16.7 inches; retracts to 2.7 inches
  • Tilt: +5 to -15 degrees
  • Swivel: up to 180 degrees
  • Included hardware: wall mounting hardware, magnetic bubble level, cable ties
  • Model: MD2413-MX
  • Product dimensions: 43.51 x 43.51 x 7.37 cm; 2.96 kg

WALI Dual Monitor Gas Spring Wall Mount (GSWM002)

Check price on Amazon

The WALI GSWM002 puts two screens on one wall plate with a gas spring arm for each, making it the premium tier choice for dual-monitor desks that need the whole worktop back. It fits two monitors from 17 to 32 inches, each up to 19.8 pounds, on detachable plates for 75 by 75 and 100 by 100 millimeter VESA patterns. Each arm adjusts independently, so one screen can sit in portrait for documents while the other stays landscape, and each can extend, tilt, and swivel without moving its partner. The maker positions this mount for wood stud, concrete, and brick walls. For a two-screen setup in a small room, a single wall plate is far easier to level and anchor than two separate mounts.

Specs

  • Screens: 2 monitors, 17 to 32 inches each
  • Weight capacity: up to 19.8 lb per arm
  • VESA patterns: 75x75mm and 100x100mm, detachable plates
  • Motion: independent gas spring arms with tilt, swivel, extension, and rotation
  • Model: GSWM002
  • Product dimensions: 41.81 x 13.31 x 29.79 cm; 3.28 kg

VIVO Full Motion Ultrawide Monitor Wall Mount (MOUNT-VW01M)

Check price on Amazon

The VIVO MOUNT-VW01M is the premium tier pick for ultrawide and heavy single screens. It supports monitors up to 49 inches and 44 pounds on 75 by 75 and 100 by 100 millimeter VESA patterns, a rating that covers the largest curved ultrawides once their stands come off. The steel arm extends up to 10.5 inches from the wall and collapses flat when you want the screen tucked away, with tilt from +5 to -12 degrees, swivel from +45 to -45 degrees, and screen leveling of +3 to -3 degrees for final alignment. Integrated cable management routes cords along the arm. The mount itself weighs 2.42 pounds, and VIVO notes that the widest Samsung screens may need the brand’s separate adapter, so confirm your panel’s mounting points before ordering.

Specs

  • Screen size: up to 49 inches, including ultrawide monitors
  • Weight capacity: up to 44 lb
  • VESA patterns: 75x75mm and 100x100mm
  • Tilt: +5 to -12 degrees
  • Swivel: +45 to -45 degrees
  • Screen leveling: +3 to -3 degrees
  • Extension: up to 10.5 inches; collapses flat against the wall
  • Material: alloy steel
  • Cable management: integrated routing clip
  • Model: MOUNT-VW01M
  • Item weight: 2.42 lb; dimensions 7.4 x 6.3 x 2.05 inches

Which Wall Mount Fits Your Setup

For one standard office monitor and the freedom to change height through the day, the WALI GSWM001 covers the widest range of screen weights and reaches farthest from the wall. Lighter screens on a tighter budget are served by the MOUNT PRO PR7001, provided your monitor stays under its 17.6 pound limit. Two-screen desks should go straight to the WALI GSWM002, since one plate and two matched arms keep alignment simple. A large or heavy display, or a screen that also serves a room, belongs on the Mounting Dream MD2413-MX with its 77 pound rating and broad VESA span. Ultrawide owners get the strongest single-screen arm in the VIVO MOUNT-VW01M, with the weight headroom curved panels demand.

Whichever mount you choose, confirm three figures on the product page before ordering: your screen’s VESA spacing, its weight without the stand, and the wall construction where the plate will anchor. Those three checks prevent nearly every failed installation.

Frequently Asked Questions

Can a monitor wall mount be fixed to drywall alone?

No. The makers of the arms in this roundup specify wood stud, concrete, or brick anchors, because a loaded arm levers against its fixings every time it moves. Anchor the wall plate into a stud or masonry, and use the lag bolts supplied for that wall type.

How do I know if my monitor fits a wall mount?

Look for four threaded holes in a square on the back panel and measure the spacing: 75 by 75 millimeters and 100 by 100 millimeters are the common patterns, and every mount here covers at least those two. Then compare the screen weight without its stand against the mount’s published capacity.

Will a TV wall mount work for a computer monitor?

Yes, provided the VESA pattern and weight line up. The Mounting Dream MD2413-MX above spans 75 by 75 to 400 by 400 millimeters and 77 pounds, so it accepts large monitors as readily as televisions, though its minimum screen size of 26 inches makes it oversized for small displays.

How far from the wall should a monitor sit?

For focused desk work, an extended arm that places the screen roughly an arm’s length from your eyes is a good guide, and the gas spring mounts here extend 16 to 19 inches to make that easy. When the screen doubles for viewing across a room, a mount that retracts close to the wall, like the MD2413-MX at 2.7 inches, keeps the room clear.

Conclusion

Wall mounting is the cleanest way to reclaim a desk, and the right mount depends on screen count and weight more than anything else. The WALI GSWM001 is the best all-round single-screen arm in this group, the MOUNT PRO PR7001 keeps lighter setups on a budget tier, the WALI GSWM002 handles dual screens from one plate, the Mounting Dream MD2413-MX carries the heaviest large screens, and the VIVO MOUNT-VW01M is built for ultrawides. Confirm your VESA pattern, bare-screen weight, and wall type, and any of these five will hold your monitor exactly where you want it.

A
admin
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Monitor Wall Mounts for Desks, Studios and…Check price on Amazon