Updated Nov 19, 2026· 10 min read

Key takeaways

  • The best KVM switches compared on computer and monitor counts, 4K resolution support and USB sharing, from a budget HDMI pick to a Thunderbolt dock.

Short answer first: for a simple two-computer, one-monitor desk, the UGREEN HDMI KVM Switch in aluminum is the budget pick to beat, with four USB 3.0 ports and 4K at 60Hz support. If you want EDID emulation so windows stay put when you switch, step up to the TESmart HKS201-P23. Laptop-and-desktop pairs are better served by the AV Access iDock B10, a USB-C docking KVM with dual monitor outputs and 100W charging for the laptop. Two DisplayPort desktops driving two high-refresh monitors point to the TESmart DKS202-M24, while a pair of Thunderbolt computers is the natural home of the Sabrent SB-TB4K. Every pick below was chosen from published port counts, published resolution support and published USB sharing details, so you can match the box to the ports your computers already have.

As an Amazon Associate, we earn from qualifying purchases.

Contents

How to Choose a KVM Switch

Count computers and monitors first

KVM naming follows a simple pattern: the first number is how many computers connect, the second is how many monitors they share. A 2×1 switch links two computers to one monitor, and a 2×2 switch links two computers to two monitors. Each computer needs one video cable per monitor plus one USB cable, so a dual monitor setup doubles the video cabling. Count the video outputs on each computer before ordering, because a laptop with a single HDMI port cannot feed a dual monitor KVM without help from a dock.

Match the video connector and resolution

HDMI models are the most common and suit most desks. DisplayPort models matter when you want high refresh rates, since the DisplayPort picks here publish support for 4K at 144Hz and beyond. USB-C and Thunderbolt models fold video, data and charging into fewer cables, but they only work when the computer’s USB-C port carries video through DisplayPort Alt Mode or Thunderbolt. Whatever the connector, the whole chain has to agree: computer output, switch and monitor input all need to support the resolution and refresh rate you plan to run, and the published ceiling of the switch is the figure to compare.

Check how USB devices are shared

Beyond the keyboard and mouse ports, most switches add shared USB ports for a printer, a storage drive, a webcam or a headset dongle. USB 2.0 sharing is fine for input devices, while USB 3.0 or faster ports are the better match for drives and docks. Dedicated keyboard and mouse ports with emulation also tend to keep hotkey switching and extra mouse buttons working, which generic hub ports do not always do.

Look at EDID and switching controls

EDID emulation stores each monitor’s display information inside the switch, so a computer keeps its resolution and window layout even while you are viewing the other machine. Without it, windows often move and resize after every switch. For controls, the common options are a front panel button, a wired desktop controller, an infrared remote and keyboard hotkeys. Pick the method that fits your desk, and note that some compact models skip hotkeys entirely.

Factor in laptop charging

USB-C docking KVMs can charge the connected laptop through the same cable that carries video and data, which removes one power brick from the desk. Published charging figures range from 60W to 100W among the picks below. A desktop-only switch needs no charging at all, but it does need its own power adapter for the switch itself in most cases.

1. UGREEN HDMI KVM Switch (Aluminum)

Check price on Amazon

The UGREEN switch covers the most common desk layout in this roundup: two computers, one HDMI monitor, one keyboard and mouse. Its aluminum housing houses four USB 3.0 ports on the shared side, so a printer, a card reader or a storage drive can follow whichever computer is active, alongside the keyboard and mouse. Video support runs to 4K at 60Hz over HDMI 2.0, which matches the ceiling of most office and home monitors.

Switching happens from the front panel button or the included wired desktop controller, a small puck that sits next to your keyboard so the switch itself can live under the desk. The box includes two HDMI cables and two USB cables, so setup needs nothing extra beyond a monitor cable you already own. Published compatibility covers Windows, macOS, Linux and Chrome OS, and no drivers are involved. For a two-computer desk that shares a handful of USB devices, this is the budget tier pick.

Specs

  • Computers: 2
  • Monitors: 1 HDMI output
  • Maximum resolution: 3840 x 2160 at 60Hz, HDMI 2.0
  • USB sharing: 4 USB 3.0 ports
  • Switching: front panel button, wired desktop controller
  • Included: 2 HDMI cables, 2 USB cables, desktop controller
  • Housing: aluminum
  • Tier: budget

2. TESmart HKS201-P23

The HKS201-P23 keeps the same two-computer, one-monitor layout as the UGREEN and adds the feature that matters most to people who switch all day: EDID emulators on both HDMI inputs. Each computer always sees a connected display, so resolutions hold and windows stay where you left them. TESmart publishes support for 3840 x 2160 at 60Hz, with lower resolutions running faster, up to 1920 x 1080 at 240Hz, which gives a single 4K monitor or a high-refresh 1080p panel room to work.

USB 3.0 ports on the front share peripherals between the two machines, and separate line-out and microphone jacks cover a headset. You can switch with keyboard hotkeys, the front button or the included wired remote switch, and an auto scan mode can cycle between machines on a timer. The kit includes two HDMI cables and two USB A-B cables plus the 12V power adapter. It is a mid-range step up for anyone whose main complaint about a basic switch is windows rearranging after every changeover.

Specs

  • Computers: 2
  • Monitors: 1 HDMI output
  • Maximum resolution: 3840 x 2160 at 60Hz; 2560 x 1440 at 120Hz; 1920 x 1080 at 240Hz
  • Video standard: HDMI 2.0
  • EDID: built-in emulators on both inputs
  • USB sharing: USB 3.0 peripheral ports, dedicated keyboard and mouse ports
  • Audio: line-out and microphone jacks
  • Switching: hotkey, front button, wired remote switch, auto scan
  • Power: DC 12V adapter included
  • Dimensions: 7.68 x 3.07 x 1.1 inches
  • Tier: mid-range

3. AV Access iDock B10

The iDock B10 is built for the mixed desk: one laptop and one desktop sharing two monitors. The laptop connects over a single USB-C cable that carries video, data and up to 100W of charging, while the desktop connects with HDMI and DisplayPort inputs. On the shared side there are two monitor outputs, one HDMI and one DisplayPort, with published support up to 8K at 60Hz and 4K at 165Hz, so a high-refresh panel keeps its speed on either machine.

Around the video path sits a full docking layout: four USB 3.2 ports at 10Gbps for shared peripherals, gigabit Ethernet, an SD card reader and a 3.5mm audio jack, all of which move to the active computer when you switch. A wired remote control handles the changeover from the desktop. If your two machines are a work laptop and a home desktop and both should drive the same pair of screens, this premium tier dock replaces a separate laptop dock as well as a plain switch.

Specs

  • Computers: 2 (1 USB-C laptop, 1 desktop over HDMI and DisplayPort)
  • Monitors: 2 outputs (1 HDMI, 1 DisplayPort)
  • Maximum resolution: up to 8K at 60Hz; 4K at 165Hz
  • USB sharing: 4 USB 3.2 ports, 10Gbps
  • Charging: up to 100W over USB-C for the laptop
  • Extra ports: gigabit Ethernet, SD card reader, 3.5mm audio
  • Switching: wired remote control, front panel button
  • Tier: premium

4. TESmart DKS202-M24

The DKS202-M24 is the DisplayPort specialist of the group, made for two desktops that each drive two monitors. Every computer connects with two DisplayPort cables and one USB cable, and the two DisplayPort 1.4 outputs support up to 8K at 60Hz per screen, or 4K at 144Hz where the panel and graphics card allow, with DSC handling the highest modes. EDID emulation is built in, and adaptive sync pass-through covers both G-Sync and FreeSync panels.

USB 3.0 ports share peripherals, a gigabit network port can be shared between the two machines, and audio and microphone jacks are on board. Switching is by hotkey or the front panel, and the box includes four DisplayPort cables and two USB 3.0 host cables, which matters because dual monitor DisplayPort cabling adds up quickly. Choose this premium tier model when both computers are DisplayPort desktops and high refresh rates are the point of the setup.

Specs

  • Computers: 2
  • Monitors: 2 DisplayPort 1.4 outputs
  • Inputs per computer: 2 DisplayPort, 1 USB-B
  • Maximum resolution: up to 8K at 60Hz per output; 4K at 144Hz; 1080p at 240Hz
  • EDID: built-in emulation; G-Sync and FreeSync pass-through
  • USB sharing: USB 3.0 ports
  • Extra ports: gigabit network, audio and microphone jacks
  • Switching: hotkey, front panel button
  • Included: 4 DisplayPort cables, 2 USB 3.0 host cables
  • Tier: premium

5. Sabrent SB-TB4K Thunderbolt 4 KVM Switch

The SB-TB4K takes a different approach: instead of separate video and USB paths, it switches whole Thunderbolt connections. Two Thunderbolt computers take turns using three downstream Thunderbolt 4 ports at 40Gbps and four USB-A ports at 10Gbps, so a Thunderbolt dock, fast storage and your keyboard and mouse all move together. Video runs over the Thunderbolt path as well, with published support up to 8K at 60Hz using DSC, or dual displays up to 4K at 60Hz on systems that support it.

The selected computer also receives up to 60W of Power Delivery charging from the included 24V power adapter, and every downstream port supports BC 1.2 charging for small devices. An integrated 70cm Thunderbolt cable keeps the host side tidy. The firm requirement is that both computers be Thunderbolt certified for full functionality, so this premium tier switch suits a pair of modern laptops rather than a mixed desk with older desktops.

Specs

  • Computers: 2 Thunderbolt hosts (Thunderbolt certification required for full functionality)
  • Downstream ports: 3 Thunderbolt 4 ports at 40Gbps, 4 USB-A ports at 10Gbps
  • Maximum resolution: up to 8K at 60Hz with DSC; dual displays up to 4K at 60Hz
  • Charging: up to 60W Power Delivery 3.0 to the selected computer
  • Cable: integrated 70cm Thunderbolt 4 cable
  • Power: 24V adapter included
  • Compatibility: Windows and macOS
  • Tier: premium

Comparison Table

Model Computers Monitors Maximum resolution USB sharing Tier
UGREEN HDMI KVM Switch (Aluminum) 2 1 HDMI 4K at 60Hz 4 USB 3.0 ports Budget
TESmart HKS201-P23 2 1 HDMI 4K at 60Hz USB 3.0 ports Mid-range
AV Access iDock B10 2 2 (HDMI and DisplayPort) 8K at 60Hz 4 USB 3.2 ports, Ethernet, SD reader Premium
TESmart DKS202-M24 2 2 DisplayPort 8K at 60Hz, 4K at 144Hz USB 3.0 ports, gigabit network Premium
Sabrent SB-TB4K 2 Up to 2 over Thunderbolt 8K at 60Hz with DSC 3 Thunderbolt 4 ports, 4 USB-A ports Premium

FAQ

What does a KVM switch do?

A KVM switch lets one keyboard, one video monitor and one mouse control two or more computers. You connect each computer’s video output and USB to the switch, connect your shared devices to the switch, and then move control between machines with a button, a remote or a keyboard hotkey instead of swapping cables or keeping two keyboards on the desk.

Can one KVM switch share two monitors between two computers?

Yes, with a dual monitor model. Each computer connects two video cables to the switch, one per monitor, plus a single USB cable for control and shared devices. The AV Access iDock B10 and the TESmart DKS202-M24 in this roundup follow that pattern, while the single monitor models need only one video cable per computer.

Do KVM switches work with wireless keyboards and mice?

Most do when the wireless set uses a USB receiver, because the receiver plugs into the switch like a wired device. Direct Bluetooth pairing with the switch is generally not supported, since the switch passes USB rather than hosting a Bluetooth radio. Dedicated keyboard and mouse ports with emulation are the safer choice for wireless sets that rely on extra buttons or media keys.

Does a USB-C KVM switch charge the laptop while it is connected?

Docking models usually do. The AV Access iDock B10 publishes up to 100W of USB-C charging for the connected laptop, and the Sabrent SB-TB4K publishes up to 60W for the selected computer, so one cable carries video, data and power. Plain HDMI and DisplayPort switches do not charge laptops, and each laptop keeps its own power adapter with those models.

Conclusion

Match the switch to the ports on your computers and the rest falls into place. The UGREEN aluminum model is the budget answer for two computers and one HDMI monitor, the TESmart HKS201-P23 adds EDID emulation and faster refresh headroom in the mid-range, and the three premium picks split by desk type: the AV Access iDock B10 for a laptop and desktop on two screens, the TESmart DKS202-M24 for dual DisplayPort desktops at high refresh rates, and the Sabrent SB-TB4K for two Thunderbolt computers that share a whole dock and storage setup. Check your video outputs and monitor inputs against the published figures above, and the switch you pick will fit the desk you already have.

A
admin
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best KVM Switches: HDMI, DisplayPort and USB-C PicksCheck price on Amazon